GRASS VALLEY SIRIUS SCR 1616-12G Installation And Operation Manual Download Page 36

Page: 36 / 77

Installation

Larger System Control Configurations

Larger System Control Configurations

Fig. 2-6: Multiple Sirius Routers and Sirius CPs with Web Browser UI Control.

Note

+ ☞

Note

The 32 buttons Sirius SCP1 hardware control panel cannot be used with an SCR 6464 router

operating in Normal mode (only 32 buttons for 64 sources and destinations). However the

Sirius SCP1 can be used when the SCR 6464 is operating in Dual or Quad mode. Control of

the SCR 6464 router in all modes is available via the Sirius SCP2 64 buttons hardware panel,

web browser, Ethernet control, and RS-422.

If the Sirius will be attached to a WAN, talk to your IT administrator and obtain the details on

how to configure the Sirius (DHCP or static IP).

LAN Switches or

Hubs

Multiple Sirius CPs anywhere on the network,

each CP can control up to four compatible

Sirius routers at a time.

Multiple Sirius Routers anywhere on the network,

controllable by any compatible Sirius CP.

Web Browser

User Interface

Compatibility:

* Sirius SCP2 can control

any Sirius Router in

any mode.
* Sirius SCP1 can control

any Sirius Router

except SCR 6464 in

Normal

Summary of Contents for SIRIUS SCR 1616-12G














































































Search results

Summary of Contents for SIRIUS SCR 1616-12G

Reviews:

Related manuals for SIRIUS SCR 1616-12G

Brands by name

Popular brands

GRASS VALLEY SIRIUS SCR 1616-12G, Installation And Operation Manual

Search results

Summary of Contents for SIRIUS SCR 1616-12G

Reviews:

Related manuals for SIRIUS SCR 1616-12G

Brands by name

Popular brands