manualshive.com logo in svg

GRASS VALLEY SIRIUS SCR 1616-12G, Installation And Operation Manual

Share
Download
GRASS VALLEY SIRIUS SCR 1616-12G Installation And Operation Manual Download Page 19

 1

1

Introduction

Overview

The Grass Valley Sirius compact SDI routers are small and cost-effective, yet robust and 

reliable. All Sirius routers support full-broadcast specifications over SD-SDI, HD-SDI, and 3G-

SDI, and single connector 12G-SDI. Additionally, Sirius routers support SDI related protocols 

such as 270Mb/s DVB-ASI and Canon 3G-SDI RAW. Sirius routers are re-clocking, non-

blocking, and ready for any broadcast, production, or post production environment. 

Running Embedded Linux, Sirius routers support powerful HTTP control and monitoring. 

Each Sirius product contains an internal web server that allows immediate installation, 

configuration, and operation without requiring additional software. It offers a powerful 

user interface via any standard web browser. Sirius SDI routers are available in three 

configurations:

• SCR 1616-12G - supports single connector 12G-SDI, sixteen inputs and sixteen outputs
• SCR 3232-12G - supports single connector 12G-SDI, thirty two inputs and thirty two 

outputs

• SCR 6464-12G - supports single connector 12G-SDI, sixty four SDI inputs and sixty four 

outputs

Because of their compact sizes, Sirius SDI routers are ideal for space-sensitive applications 

such as mobile sports trucks, edit suites, corporate video installations, or live theatrical A/V 

rigs.

Sirius Features

The Sirius routers offer the following features for ease of use in a broad range of SDI 

applications and workflows:

• SCR 1616-12G, 3232-12G, and 6464-12G support for SD-SDI, HD-SDI, 3G-SDI, 6G-SDI 

and 12G-SDI (SMPTE-259/292/424/2081/2082)

• Firmware v3.0 and above supports dual and quad mode routing, allowing users to 

group together inputs and outputs for multiple cable applications like Dual Link, Quad 

HD, Quad split monitors, and even 8K video.

• Firmware v4.3 and above supports salvos, controlled from the Sirius router Web UI and 

the SCP2 panel.

• Automatic cable equalization and re-clocking
• Supports all embedded VANC and HANC ancillary information, including embedded 

audio

• Reference via BNC, passive loop, PAL/NTSC color black or Tri-level sync
• Output switch timing per SMPTE RP 168 when using an external reference
• 10/100/1000 Ethernet LAN

Summary of Contents for SIRIUS SCR 1616-12G














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands