GRASS VALLEY Kayenne XL Package, User Manual

Page: 91 / 624

Kayenne XL Package — User Manual 91
Source Selection
Manual Latch Mode
By pressing a shift level button, the row will be temporarily delegated to
that level. For a static delegation a double-click has to be done.
The
1st
level can be reached by pressing the selected shift level button (tem-
porarily) or bye double-clicking on it.
If the 4th level button is not assigned, the level can be temporarily reached
by pressing the 2nd and 3rd level button at the same time.
For a static delegation of the 4th level a double-click of the 2nd level button
and a double-click of the
3rd
level button have to be done.
To reach the 1st level, one of the selected shift level buttons has to be
double-clicked twice.
Auto Latch Mode
In auto-latch mode, taking a source at a certain shift level automatically
causes a delegation of the source row (and source name displays) to the
new shift level and tallies the shift buttons for the new shift level. This
means the bus stays delegated to the shift level.
To delegate a bus to a shifted level, push the shift button. The shift button
is high tallied and the source name displays show the source names for the
selected shift level. The bus now remains in this shifted state.
Delegation to Aux Bus Selection
Aux bus delegation supports the selection of sources for any aux bus,
eDPM, iDPM and RamRecorder bus.
To functionally delegate the row 1 and/or 2 to aux bus selection:
• Press the aux bus select button (toggle it on).
For each set of controls:
• Pressing a button on the top row of buttons selects an aux bus (destina-
tion).
• Pressing a button on the bottom row selects a source for the aux bus
selected on the top row.
The source name display between these two buttons has four lines dis-
playing the following:
• Line 1 : Aux bus number
• Line 2 : Aux bus name
• Line 3 : Current Aux Bus source
•
Line 4
: Sources