GRASS VALLEY Kayenne XL Package User Manual Download Page 456

Page: 456 / 624

456

Kayenne XL Package — User Manual

Section 5 — Menu Summaries

Media Player Menu

MP Status Submenu

The Media Player menu serves to control external VTRs or other Media
Servers.

The Kayak offers a set of protocols that enable the user to connect and
control virtually all video servers, disk recorders, and VTRs on the market.

The protocols to select from are:

•

BVW75 (industry standard VTR protocol)

•

Mediapool

•

Odetics

•

VDCP (aka Louth), there are specialized versions for the Profile™
server family.

•

Pbus

With these protocols the Kayak can control:

•

VTRs (BetaCam, DVCPro, etc.)

•

Video Servers

•

Disk Recorders

•

Other media players

The list of servers that have at least one of the protocols implemented
includes:

•

Thomson Grass Valley: Profile, Profile XP, M-Series

•

Thomson: Nextore

•

Philips: Mediapool™

•

Leitch (ASC): VR300, VR400

•

DVS: ProntoVision

•

Sea Change

•

Pinnacle: MediaStream (HP), Thunder

•

Pluto

Disk recorders that have at least one of the protocols implemented include:

•

Accom: Attache, WSD

•

Abekas: A66, Diskus

•

Edifis: Brick, Sting

•

Fast Forward Video: Omega deck

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Kayenne XL Package

Reviews:

Brands by name

Popular brands

GRASS VALLEY Kayenne XL Package, User Manual

Search results

Summary of Contents for Kayenne XL Package

Reviews:

Brands by name

Popular brands