GRASS VALLEY Kayenne XL Package, User Manual

Page: 541 / 624

Kayenne XL Package — User Manual 541
DPM Menu
A recursive strobe action ( Trails , Freeze , etc.) can start at each keyframe of
an effect or triggered after a certain period.
•
Recursive Loop
: Switch on to enable recursive modes.
• Show Picture : Continues to show current image when recursive mode is
active
•
Layer Mode
:
Over
causes the recursive images to be superimposed on top
of the existing image. Under causes them to be added beneath. Erase
removes image in recursive image area.
• Keyframe Reset : Clears the recursive memory. With this operation, all
traces of previous recursive images are removed. This can be useful
when an effect is rewound.
• Force Strobe : When On , strobe action take places even when no effect is
running. Active for Trails, Freeze, and Montage.
• Strobe Type : Controls type of Recursive strobe events. Time uses the
Period as a basis for strobe actions. Keyframe uses the keyframes of the
channel's running timeline as a trigger for strobe actions
• Parameter group Appearance
• Decay : Rate of image decay
•
Star Decay
: Rate of random points (star) decay
• Blur : Amount of blur
• Period : Number of fields (interlaced mode) or frames (progressive
mode) between each image capture for the strobe.
• On Time : Amount of time (percentage) that the image is unfrozen
within the period
Note When Strobe Type is set to Time the minimum Period should be 3 fields
(interlaced mode) or 2 frames (progressive mode). Otherwise no recursion
will be visible!
• Matte Control applies matte to the recursively generated image. With
Matte the image is filled with color as defined by Hue , Saturation , and
Brightness . With Rainbow the recursive image is filled with color having
hue that varies by
Speed
.

The remaining parameter names are self-explaining.