GRASS VALLEY Kayenne XL Package User Manual Download Page 609

Page: 609 / 624

Kayenne XL Package — User Manual

609

Image Converter

Destination Pixel Format

Actuating the

Convert

button opens a dialog window for the detail adjust-

ments. The following destination pixel formats can be adjusted:

Figure 503. RAM Recorder – Image Converter – Destination Pixel Format

If the source and destination pixel format is different, the image is resized
to maintain the aspect ration of the image content.

•

If PC as destination pixel format is selected, the first picture to be con-
verted determines the picture format of the destination file.

•

If a TV format is selected as destination pixel format is selected, the des-
tination file is coupled with TV format.

Converting Size, Positioning, and Preview

Having selected the conversion parameters, you may have a look at the
format in the Preview window. The

red frame

shows the outer edge of the

picture (TV format only) to be converted and the

white frame

shows the

limits of the picture screen after conversion.

The switches

Allow enlarge

Allow shrink

Keep aspect

and the controls located

below enable adjusting and locating the desired picture section.

is selected as destination pixel format, only the “size” control (

<<<

xx% >>>

) is active.

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Kayenne XL Package

Reviews:

Related manuals for Kayenne XL Package

Brands by name

Popular brands

GRASS VALLEY Kayenne XL Package, User Manual

Search results

Summary of Contents for Kayenne XL Package

Reviews:

Related manuals for Kayenne XL Package

Brands by name

Popular brands