manualshive.com logo in svg

GRASS VALLEY Kayenne XL Package, User Manual

Share
Download
GRASS VALLEY Kayenne XL Package User Manual Download Page 488

488

Kayenne XL Package  —  User Manual 

Section 5 — Menu Summaries

 

Restore your Clips/Stills

To restore your RamRecorder clips/stills from the backup system, proceed 
as follows:

•

Go to the 

RamRecorder - Transfer

 menu.

•

Select 

Transfer Mode

 and afterwards 

Realtime Import.

•

Select a channel for the data transfer.

•

A dialog appears to open the backup file with the stored metadata and 
audio package.

•

If the RamRecorder already contains clips, a Warning dialog appears. 
For real-time import, the RamRecorder has to be empty. Please delete 
the clips and stills first, and start the restore process again.

•

Upon restoring the metadata and audio a request dialog appears: 

Start 

your external server in playback mode and press Continue

.

•

Be sure that you external device is connected with the Ram channel 
selected.

•

Select the input source for the desired RamRecorder (for example, 

Input 30

).

•

Connect your external device with a video input (for example, 

Input 

30

).

•

Make sure the video clip on the backup device is positioned in front of 
the clip.

•

Press 

Continue. 

All video clips/stills will be transferred in real-time to 

the RamRecorder and synchronized with the metadata and audio auto-
matically.

•

Start your external device in 

Playback

 mode.

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands