manualshive.com logo in svg

GRASS VALLEY Kayenne XL Package, User Manual

Share
Download
GRASS VALLEY Kayenne XL Package User Manual Download Page 360

360

Kayenne XL Package  —  User Manual 

Section 5 — Menu Summaries

 

Coupling Rules

Each M/E can be coupled to any other M/E as long as they belong to the 
same application and the coupling doesn't become recursive. The coupling 
can be done in serial, parallel and in combinations.

•

Serial: 

PP to M/E3 to M/E2

M/E3 is coupled to P/P.

M/E2 is coupled to M/E3.

M/E1 is not coupled.

•

Parallel: 

PP to M/E3; PP to M/E2

Both, M/E3 and M/E2 are coupled to PP. M/E1 is not coupled.

•

Combined: 

PP to M/E3; PP to M/E2

Both, M/E3 and M/E2 are coupled to P/P. 

M/E2 to M/E1

M/E1 is coupled to M/E2.

Note

Recursion is not possible. PP to M/E3, M/E3 to PP is not allowed.

Each M/E can be used as a Master M/E. If a coupled M/E is modified 
directly via a control unit, the master M/E is not affected.

Note

When the Half M/E is coupled (for example DSK mode), the stage is not avail-
able for M/E Couple.

Coupled Resources

After selection of the M/E Couple Mode in the 

Config - E-Box 

menu, the fol-

lowing M/E resources can be coupled:

•

PGM and PST bus (optionally by one substitution table) at M/E 
crossbar.

•

CUT, AUTO and FADER at M/E transition.

By selecting M/E Couple in the 

Status

 menu, the following function can be 

coupled in addition:

•

Fill buses of the keyers. Together with the key memory, most keyer 
adjustments can be recalled (no wipes...).

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands