manualshive.com logo in svg

GRASS VALLEY Kayenne XL Package, User Manual

Share
Download
GRASS VALLEY Kayenne XL Package User Manual Download Page 485

Kayenne XL Package  —  User Manual 

485

RamRecorder Menu

 

Realtime Export

The Kayenne XL switcher features a real-time backup system. 

Operating Philosophy:

For real-time backup the RamRecorder content and metadata will be split 
in two streams:

•

Video content will be saved on a connected media server or video 
recorder.

•

Audio content and the clip’s metadata will be saved on a USB Flash 
Memory or to the mainframe’s hard disc, when using the Kayak menu, 
or to the hard disk of the connected sidepanel PC, when using the 
sidepanel menu.

The restore of the RamRecorder clips is organized in two phases. First the 
metadata and audio will be restored. After that the video will be trans-
ferred and automatically synchronized.

Backup your Clips/Stills

To backup a RamRecorder clip/still pool, proceed as follows:

•

Go to the 

RamRecorder - Transfer

 menu.

•

Select Transfer Mode and afterwards 

Realtime Export.

•

Select a channel for the video playout, for example, 

Ram1.

Note

During the transfer process, the other channels can be used for normal oper-
ation.

•

A dialog appears for entering the backup directory and file name for 
metadata and audio package to be stored. As default a file name with a 
unique alpha-numeric character string will be generated in order to 
label the exported video package.

•

In the next dialog you can select whether the metadata only or meta-
data as well as audio are to be stored.

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands