manualshive.com logo in svg

GRASS VALLEY Kayenne XL Package, User Manual

Share
Download
GRASS VALLEY Kayenne XL Package User Manual Download Page 307

Kayenne XL Package  —  User Manual 

307

Install Menu

 

Note

The Kayenne XL cannot support both SD and HD at the same time; you must 
choose one mode or the other. If you change the mode from SD to HD (or 
vice versa) then the switcher hardware must reprogram itself to process the 
change. This takes a minute, but you only have to do it when changing from 
HD to SD, or from SD to HD.

Select SF Mode

The Kayak HD system supports 1080sf (segmented frame) video formats at 
23.9, 24, 25 and 30 fps. Segmented frame video captures a frame of video 
progressively, but displays the frame as two interlaced fields. 

This can give a slightly different look to the resulting video playback. Inter-
laced and segmented frame video requires different internal system video 
processing techniques. These include changes to crosspoint cut points, 
wipe pattern geometry, and interpolation.

When using Auto Detect, the switcher system automatically detects the line 
and frame rate of the incoming video reference signal and reports its sync 
reference status on the menu. However, the system cannot always directly 
determine whether the incoming video is interlaced or segmented frame. If 
HD Auto Detect is selected as the video standard, you must set the SF Mode 
manually for some rates.

Because 1080-24/23.9 fps video is only produced in segmented frame, the 
system always uses segmented frame processing whenever it operates with 
a 1080-24/23.9 fps sync signal.

To select the SF mode for the switcher, set the parameter 

HD Auto Preselect

 

to 

Segmented Frame Mode

.

Adjust Internal System Timing

Genlock Phase

 adjusts/moves the switcher’s internal system timing with 

respect to the selected reference. Adjusting the phase affects the phase of all 
inputs and outputs of the switcher with respect to the external reference.

Use the AUX1 bus to check the video timing of all inputs. This compares 
the video source selected on the AUX1 bus to the switcher’s internal system 
timing.

Figure 246.  Install E-Box Timing Aux1 Source Select

Summary of Contents for Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands