GRASS VALLEY Focus 70 Live, User Manual

Page: 92 / 112

92 Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)
Chapter 6 - Camera menu reference
6.6 Diagnostics menu
Menu item Values Default Level File Description
Communication
Connections
BS Connected Yes, No — User 2 — Indicates if an Base Unit (BS) is connected to
the camera.
C2IP Panels 0..99 — User 2 — Shows number of C2IP control panels
connected to the camera.
LDK Connect GW Yes, No — User 2 — Indicates the presence of a Connect Gateway
in the camera network.
Ser Stats (DTCP) (Advanced settings)
....
Ser Stats (PCI) (Advanced settings)
....
SPI Stats (Advanced settings)
....
Transmission
Cable Length 0%..200% 0% User 0 — Shows % of cable length used with respect to
maximum cable length. Values > 100 indicate
that transmission is below specification.
Cable Status OK, Critic, Error,
NoSig OK User 0 — Shows status of the transmission cable:
OK = transmission is OK
Critic = cable status is critical but transmission
will continu.
Error = cable quality is too low and
transmission is not guaranteed.
NoSig = no signal detected
Signal Status OK, Critic, Error,
NoSig OK User 0 — Shows status of the transmission signal:
OK = transmission is OK
Critic = signal status is critical but transmission
will continu.
Error = signal quality is too low and
transmission is not guaranteed.
NoSig = no signal detected
BS->CAM
Cable Status OK, Critic, Error,
NoSig NoSig Service — Shows status of the transmission cable.
Signal Status OK, Critic, Error,
NoSig NoSig Service — Shows status of the transmission signal.
RX Margin -100 dB .. 100 dB 0 dB Service — Shows received optical margin.
CAM -> BS
Cable Status OK, Critic, Error,
NoSig NoSig User 0 — Shows status of the transmission cable.
Signal Status OK, Critic, Error,
NoSig NoSig User 0 — Shows status of the transmission signal
RX Margin -100 dB .. 100 dB 0 dB User 0 — Shows received optical margin.
Transm Details
Opt Module Unknown,
FTLF1424P2 Unknown Service — (Advanced settings)