GRASS VALLEY Focus 70 Live User Manual Download Page 46

Page: 46 / 112

Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)

Chapter 4 - Operating instructions

Refer to the documentation of the lens manufacturer for more information about the precision
focus feature.

4.8.6 Lens indicators in the viewfinder

The

RE indicator

in the viewfinder lights when a lens range extender is selected.

The

Iris indicator

in the viewfinder shows the value of the iris opening (when enabled in the

camera menu).

The zoom

indicator in the viewfinder shows the percentage to which the lens has been

zoomed out or in, ranging from 0 (wide angle) to 99 (telezoom). It shows 50 if the lens does not
support this feature.

The focus indicator shows the percentage of the focus distance range from 0 (close-up) to 99
(infinity). This feature is only available when a digital lens is used.

Indication

Focus information

- -

focus is behind

area is in focus

focus is in front

+ +

focus is in front

Summary of Contents for Focus 70 Live
















































































































Search results

Summary of Contents for Focus 70 Live

Reviews:

Brands by name

Popular brands

GRASS VALLEY Focus 70 Live, User Manual

Search results

Summary of Contents for Focus 70 Live

Reviews:

Brands by name

Popular brands