manualshive.com logo in svg

GRASS VALLEY Focus 70 Live, User Manual

Share
Download
GRASS VALLEY Focus 70 Live User Manual Download Page 25

Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)

25

Chapter 2 - Installation

2.6  Exchanging the camera adapter

2.6.1  Preparation

•

Exchange the adapter in a safe area, preferably indoors. Make sure your working area is 
clean and dust free.

•

Remove all accessories (microphone, viewfinder, lens and cables) before exchanging the 
camera adapter.

•

For the exchange procedure a Torx T20 size screwdriver is needed.

2.6.2  Attaching the adapter

Caution 

Be extremely careful with the connectors between the camera head and the adapter. Do not 
allow the metal guide pins to damage the pins of the docking connector.

Do not touch the uncovered blades of the cooling fan of the adapter.

Follow the indicated steps in the indicated order. Tightening or loosening the screws in the 
wrong order could result in mechanical damage to the camera and/or the adapter.

To attach the adapter to the camera head proceed as follows:

1.

Fit the guide pin at the top rear of the camera head into the corresponding slot of the 
adapter and at the same time fit the guide pins on either side of the docking connector 
into the corresponding slots [1] of the camera.

2.

Carefully press camera head and adapter together at the bottom and tighten the two 
screws [2] at both sides of the camera head.

1

4

2

1

3

Summary of Contents for Focus 70 Live

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands