LCX603-UM-651-9370
2-87
2 Setup
2.23 Setting the Anti-Wrinkle Line
Set whether to print the anti-wrinkle lines or not.
When set to ON, a line about 1.3 mm wide is printed outside the printing area in the direction of the width
of the media printing data, and wrinkling is prevented.
Typically, use this device with the lines printed (ON).
When shipped from the factory, the device is set to ON.
When the balance of the print data position is poor, wrinkles occur on the ribbon during printing, and there
are cases where this has an effect on the printing result. In a case such as this, set to ON.
When not necessary use this anti-wrinkle lines, set this setting to OFF. (If printing good balance of printing
data.)
Feeding direction
Anti wrinkle lines
How to set the anti-wrinkle lines function
(1) Press the LOCAL Key in READY status, the following menu is displayed.
PRINTER MENU>
CUTTER MENU>
OUTPUT ALL>
(2) Press the F1 Key (PRINT MENU), the following menu is displayed.
COPY>
DATA CLEAR>
CONDITION>
1/4
(3) Press the NEXT Key until the following menu is displayed.
PRINT SETTING>
PRINT TEST PATTERN>
HEAD ADJUSTMENT>
2/4 PRINTED LENGTH>
(4) Press the F1 Key (PRINT SETTING), the following menu is displayed.
PRINT DENSITY>
PAGE PRINT MODE>
ANTI-WRINKLE LINES>
Summary of Contents for LABELROBO LCX603
Page 2: ......
