LCX603-UM-651-9370
2-43
2 Setup
(9) Expand the ink ribbon as shown in the picture below.
Not yet printed side
Printed side
(The side, which rolls the transparent part
when the ribbon is new)
(10) Put the ink ribbon cassette onto the expanded ink ribbon as shown in the picture below.
Confirm the rewind direction of ribbon is same as shown in the picture below.
(11) Set the ink ribbon and hold the flange section when setting it. Push until there is a clicking sound.
Set the cutout section of the ink ribbon bobbin into the position shown in the below picture.
Printed side
Set the cutout part of
bobbin to this side.
Not yet
printed side
During set-up, be careful not to confuse the sending side with the wind-up side. (When set in the
ribbon stocker, make the area coming toward the upper side the wind-up side.)
Take care not to let dust into the cassette bar or ribbon. The significant presence of dust can lead to
a thermal head malfunction. If dust has settled on the cassette bar or ribbon, slightly wind the wind-
up side.
Summary of Contents for LABELROBO LCX603
Page 2: ......
