LCX603-UM-651-9370
3-19
3 Installing the Printer Driver
Color Settings ................... When clicking “Select Cutline”, “Setting the Color” will be displayed. You can
then choose from the basic colors, or add a new one through “Add Color”.
The allowable value range for a given color is set as ± 50 as default.
Allowable Value Range...The allowable value range with respect to color setting
255 is displayed, which can then be set in the 0 - 100 range.
For example, if the value is set to 50, up to 205 is recognized as a set color.
Step Pass ......................... This function carries out processing while skipping the blade tip control. By
lowering the setting value, the arc’s fine blade tip control is carried out smoothly,
which improves the image quality.
If a very big value is selected, then the cut shape could not be executed
properly.
Typically, please use the default settings.
Depending on the application, because the circle or ellipse data is output in fine
lines, the cutter vibrates due to the blade tip control, which may cause distortion
in the cut. If this happens, by increasing the value here, the cutline will become
smooth and the cutting speed will be improved.
Vectorize Raster Lines ..... Depending on the application, the line processing method is different, and the
cutline extraction may not be possible. Using this function allows the cutline
extraction in some cases.
Typically, please use it with “None”.
None: .................... Raster lines are not vectorized. Only data, which has been
sent as vector lines from the application, is handled as
Cutlines.
Method 1: .............. The same as “None”, with one addition. Certain types of
rectangular solid fill data are handled as thick vector line
data.
Method 2: .............. The same as Method 1, with one addition. When circles,
ellipses or other curved lines are sent as raster data,
Cutlines will also be extracted from the raster data.
Method 3: .............. Cutlines are extracted from the raster data only. Use Method
3 if you have problems such as rectangles being output as
separate segments when you use Method 1 and 2.
Summary of Contents for LABELROBO LCX603
Page 2: ......
