GRAPHTEC CUTTING PRO FC2250 Series, User Manual

Page: 93 / 129

5-18
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
5.16 Setting the Mirror Mode
When MIRROR mode is selected using this function, the origin and coordinate axes are inverted as shown
in the
fi gure below.
MIRROR mode is not selected (OFF)
X
Y
Origin
Y
X
MIRROR mode is selected (ON)
X
Y
Origin when MIRROR mode is selected
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key until the following menu is displayed.
FORCE OFFSET
SPEED QUALITY
I/F FUNCTION
TOOL COND AREA OPT
(3) Press the [F4] key (AREA OPT) to display the menu shown below.
FORCE OFFSET
SPEED QUALITY
ROTATE MIRROR
L.L. U.R. SCALE
(4) Press the [F3] key (MIRROR) to display the MIRROR mode setting screen.
FORCE OFFSET
SPEED QUALITY
MIRROR
ON OFF•
The current setting is indicated by a black dot [
•
].
To select MIRROR mode, press the [F2] key (ON).
To cancel MIRROR mode, press the [F4] key (OFF).
After you have selected the desired parameter, press the [ENTER] key to con fi rm your selection.
(5) Press the [PAUSE] key to cancel PAUSE mode.
•
When the plotter is turned off, the MIRROR mode returns to its default setting (OFF).
•
The MIRROR mode is set to OFF when MARK TYPE 3 is selected.