3-10
Chapter 3 PREPARATIONS FOR CUTTING/PLOTTING
(3) Press a key from
[F1]
to
[F4]
to move the blinking cursor to the parameter that you wish to set.
(4) Change the setting value of the parameter that you wish to set.
(5) Press the
[ENTER] key
to register the setting conditions in the plotter’s internal memory. To cancel your settings,
press the
[NEXT] key
.
(6) Press the
[TEST] key
to perform test cutting. Make any adjustments required by changing the settings to suit the
media type and thickness.
Setting the Cutting Force
(Pen Force, Creaser Force)
[FORCE]
This setting determines the cutting force for a cutting operation, the pen force for a plotting operation and the
creasing force for a creasing operation. Please see Section 3.10, "Media and Cutting Conditions" for further
details on the setting values.
When cutting card, cardboard or similar media the cutting force that will be required changes according to the cutting
direction.
(1) With the plotter in Ready status, press a key from
[F1]
to
[F4]
to select the COND No. that you wish to change.
(2) Press the
[CONDITIONS] key
to display the following screen. (The display will differ according to the setting
conditions that have been made.)
FORCE
OFFSET
SPEED
QUALITY
X20 COND1 09U 0
30 CHANGE TOOL1 4
(3) Press the [F1] key to move the blinking cursor to the FORCE parameter.
FORCE
OFFSET
SPEED
QUALITY
X20 COND1 09U 0
30 CHANGE TOOL1 4
(4) Use the
[
]
or
[
] key
to toggle between X and Y (but not when "PEN" has been selected for the cutter blade
type). When the direction that you wish to set the value for is displayed, use the
[
]
or
[
] key
to change the
value.
Setting range (for both X and Y): Tool holder 1: 1 to 40, Tool holder 2: 2 to 80 (in increments of 2)
If different values have been set for X and Y, the cutting force in the diagonal direction will be a value between the X
and Y values, and will vary according to the angle.
Cutting force
[Y]
Cutting force
[X]
Cutting force
[*]
Y
X
45°
(Cutting force [X])g + (Cutting force [Y])g
2
[*] =
(5) When the displayed settings are correct, press the
[ENTER] key
. To cancel your settings, press the
[NEXT] key
.
Setting the Speed [SPEED]
This setting determines the tool speed for a plotting operation. Please see Section 3.10, "Media and Cutting
Conditions" for further details on the setting values.
(1) With the plotter in Ready status, press a key from
[F1]
to
[F4
] to select the COND No. that you wish to change.
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
