GM · CONVERTING UNIT
30
9.
Special parameters
The following menu is reached by pressing 'Next' on the language setup screen.
Nip roller sizes:
The machine uses 304.8 mm (12”) rollers with a diameter of 97.02. Altering the size of the nips will
change the overall tension in the machine.
Digital 1 – 2 & Analog 1-2:
The 'Mark reader distance' value is used for calibrating the register control, in order to get the die-cutting
station in register quickly. Basically, this is the web distance between the mark reader and the die-cut
cylinder, when the sledge is in its engage position.
NOTE!Factory default value is 111 mm. Analog and digital setting is normally the
same.
Press 'Accept' to save changes and exit, or 'Cancel' to exit without saving changes.
The 'Previous' button leads back to the language setup menu.
