GM · CONVERTING UNIT
67
29.
Training:
The training on the converting line is training into how to run this specific one colour UV flexo press: It
is not an education in how to be a printer. The training needed depends a lot on the knowledge and skill
of the staff that has to operate the machine. If the company is a printer plant with knowledge on operating
traditional UV flexo presses an operator can learn to run the machine in one to two days. If the company
are not familiar with standard UV flexo machines more weeks can be needed. We strongly recommend
that only staff with printer experience operate the machine.
To prepare the training please respond on the following scheme:
Name
Flexo Printing
experience ZERO
Flexo Printing
experience MEDIUM
Flexo Printing
experience HIGH
Before the training starts it is important that the staff has got familiar with the manual for the
machine.
To be filled out under the installation:
GM service engineer: ______________________________________
Customer: _______________________________________________
Machine arrived
Date
Time
Comments
Unloading
Machine installed
Power OK
Pressure Air OK
Test material OK
Varnish OK
Super gloss OK
Training start
Training end
