GM · CONVERTING UNIT
18
6.1.
Parameters
The 'Automatic stop at low unwinder diameter' feature makes the converting unit stop when the roll on
the unwinder spindle becomes smaller than the value. The diameter range is 80 .. 200 mm (3.1 .. 7.9").
The 'Automatic stop at label preset' feature makes the converting unit stop when the label counter reaches
or exceeds the preset value. The maximum value is 999999.
Note: When running in-line with another machine, e.g. a print engine, the converting
unit does not stop when the preset value has been reached. This is to avoid web spilling
on the floor, or paper jam in the print engine
.
The 'Automatic varnish roller' feature lifts the varnish roller when the web is not moving, and engages it
as soon as the web is moving again.
The 'Automatic laminate roller' feature lifts the laminate roller when the web is not moving, and engages
it as soon as the web is moving again.
The 'Nips and spindles off' feature may be useful when threading the machine. It lets the main motor run,
but turns off all spindles and nips.
