GM · CONVERTING UNIT
29
8.
Language and units setup
On the startup screen (right after power-up), press the 'Setup' button, to get to this menu:
When more languages have been installed in the panel, these can be selected with the radio buttons in the
left part of the screen.
In the 'Units' menu, the measuring units can be selected. In 'Metric' mode, the speed is measured in
m/min, and linear measurements are in m or mm. In 'Imperial' mode, the units are feet/min, feet and
inches.
In the 'Time' menu, the clock (24h) can be adjusted.
The 'UV hours' readout is the number of hours that the UV lamp has been on. This can be used for
predicting when the lamp needs replacement. When the lamp is replaced, reset the counter by pressing
the [
0] button.
Press 'Accept' to save changes and exit, or 'Cancel' to exit without saving changes.
Note: The selected time is not affected by pressing the 'Cancel' button.
The 'Next' button will lead to the Special parameters menu.
