Gradall XL3100IV, Operators Safety Manual

Page: 26 / 172

Section 2 - Pre-Operation and Controls
2-2 80804002
2.2 WALK-AROUND INSPECTION
Begin your walk-around inspection at item 1, as noted below. Continue to your right,
checking each item in sequence.
INSPECTION NOTE: In addition to any other criteria mentioned, on all components:
• Ensure there are no loose or missing parts and that all parts are securely
fastened.
• Check for visible leaks and excessive wear.
• Inspect all structural members including attachment for cracks, excessive
corrosion and other damage.
1. Undercarriage Cab -
• General appearance; no visible damage; Operator & Safety manual located in
manual drawer.
• Grab handles and steps secure and clean.
• Window glass and mirrors clean and unobstructed. Adjust mirrors for
maximum visibility, before and during operation. Be sure windows and doors
are securely latched in open or closed position when operating. Replace
damaged latches immediately.
• Check seat belt for working condition damage, replace belt if frayed or cut
webbing, damaged buckles or loose mounting hardware.
2. Front Axle - Drag link undamaged; steer cylinder and oscillation lock cylinders
undamaged, not leaking; hydraulic hoses undamaged, not leaking; brakes
undamaged.
3. Wheel/Tire Assembly - No loose or missing lug nuts; proper inflation (see
page 5-33 for details). No damage to rims or tires; axle bolts torqued.
OAC1890
1
2
3 4
5
7
8
9
10 11
11
12
13
14
15 16
17
18
19 20
21
6