Gradall XL3100IV, Operators Safety Manual

Page: 142 / 172

Section 5 - Lubrication & Maintenance
5-28 80804002
Engine Coolant Level Check
1. Perform shutdown procedure on page 3-14 or page 3-33.
2. Open the engine cover.
3. Check coolant level in overflow bottle (1) . When coolant is hot, level should be
at the “HOT LEVEL” mark. When coolant is cool, level should be at the “COLD
LEVEL” mark.
4. If coolant is low, remove overflow bottle cap (2) and add coolant (50/50 mixture
of ethylene glycol and water) as required. Note : Allow engine to cool before
removing the overflow bottle cap.
5. Replace overflow bottle cap.
6. Close and secure the engine cover.
10
OAC1030
OAC1160
OAC1950
1
1
2
HOT LEVEL
COLD LEVEL
TOP VIEW OF POWER UNIT SHOWN