Gradall XL3100IV, Operators Safety Manual

Page: 102 / 172

Section 3 - Operation
3-32 80804002
The rated lift capacity is based on the machine being on flat, level ground and
equipped with standard boom and no bucket. Adjust the listed rated capacities on
capacity chart located in operator cab according to each bucket as shown:
Note: Bucket adjustment values are 87% of the actual bucket weights. Any weight
adjustment for Gradall buckets not shown can be calculated by multiplying actual
bucket weight by .87.
• The load point is located on the bucket pivot point, including load listed for
maximum radius.
• Do not attempt to lift or hold any load greater than the rated values at specified
load radii and heights. The weight of slings and any auxiliary devices must be
deducted from the rated load to determine the net load that may be lifted.
ATTENTION : All rated loads are based on the machine being stationary and level on
a firm supporting surface. The user must make allowance for particular job
conditions such as soft or uneven ground, out of level conditions, side loads,
hazardous conditions, experience of personnel, etc. The operator and other
personnel must be fully trained and understand this Operator Manual and Safety
Manuals furnished by the manufacturer before operating this machine. Rules for safe
operation of equipment must be adhered to at all times.
Part Number Size Description Weight Adjustment
80656007 60" (1.5m) Ditching -807lbs. (366kg)
80656006 66" (1.7m) Ditching -892lbs. (405kg)
80656002 72" (1.8m) Ditching -943lbs. (428kg)
80456020 24" (610mm) Excavating -560lbs. (255kg)
80456021 30" (762mm) Excavating -660lbs. (300kg)
80456022 36" (914mm) Excavating -741lbs. (336kg)
80456023 42" (1.1m) Excavating -841lbs. (382kg)
80456024 48" (1.2m) Excavating -957lbs. (434kg)
80656013 72" (1.8m) Dredging -1114lbs. (505kg)
80656102 40" (1.0m) Pavement -1262lbs. (573kg)
80656024 8’ (2.4m) Blade -630lbs. (285kg)
80656009 24" Single Tooth Ripper -557lbs. (253kg)