Gradall XL3100IV, Operators Safety Manual

Page: 27 / 172

Section 2 - Pre-Operation and Controls
2-3 80804002
4. Hydraulic Reservoir - Recommended fluid level on sight gauge (see page 5-22
for instructions); filler/breather cap secure and working; oil is clear.
5. Air Tanks - Check for damage/leaks; open petcocks to eliminate condensation.
See page 5-30 for instructions.
6. Battery Box - Battery cables tight, no visible damage or corrosion. Battery box
cover properly latched. See page 5-35 for details.
7. Worklights- Clean, undamaged and aligned properly.
8. Upperstructure Cab -
• General appearance; no visible damage; Operator & Safety manual located in
manual drawer.
• Grab handles and steps secure and clean.
• Window glass and mirrors clean and unobstructed. Adjust mirrors for
maximum visibility, before and during operation. Be sure windows and doors
securely latch in open and closed position. Replace damaged latches
immediately.
• Check seat belt (if equipped) for damage, replace belt if frayed or cut
webbing, damaged buckles or loose mounting hardware.
9. Center Pin - See Inspection Note.
10. Wheel/Tire Assemblies - No loose or missing lug nuts; proper inflation (see
page 5-33 for details). No damage to rims or tires; axle bolts torqued.
11. Rear Axle(s)/Fenders - Check mud flaps for proper position and condition for
highway operation; brakes undamaged.
12. Wheel/Tire Assemblies - No loose or missing lug nuts; proper inflation (see
page 5-33 for details). No damage to rims or tires; axle bolts torqued.
13. Main Control Valve and Cover - See Inspection Note. Replace damaged latch
and weak access cover support strut immediately.
14. Tilt Gear - Properly lubricated.
15. Fuel Tank - Check fuel level, refill as required (see page 5-21 for instructions);
filler cap securely fastened.
16. Boom -
• Rollers properly adjusted; no visible damage to boom hoses
• Boom secure if machine is to be driven on highway.
17. DEF (Diesel Exhaust Fluid) Tank - Check DEF level, refill as required.
18. Air Cleaner - Air cleaner element condition indicator, check for clogged
condition. Replace element as required. See page 5-26 for details.