![background image](http://html.mh-extra.com/html/graco/linelazer-v-200mma/linelazer-v-200mma_operation-repair-parts_2250947020.webp)
Setup
20
3A9099A Operation, Repair, Parts
32. Increase pressure control knobs to desired
pressure.
33. Test spray onto cardboard. Adjust pressure to
achieve desired results. If you suspect the spray tip
34. Open Purge Air Valve to purge mixed material from
tip and spray tip adapter.
You are now ready to spray!
Keep Components A and B
Separate
Changing Materials
NOTICE
Purge Air Valve must be open to purge material from
gun. Purging material maintains the gun’s
functionality and prevents hardened material in gun
components.
PURGE AIR
OFF
ON
Cross-contamination can result in cured material in
fluid lines which could cause serious injury or damage
equipment. To prevent cross-contamination:
•
Never
interchange component A and component
B wetted parts.
• Never use solvent on one side if it has been
contaminated from the other side.
NOTICE
Changing the material types used in your equipment
requires special attention to avoid equipment damage
and downtime.
• When changing materials, flush the equipment
multiple times to ensure it is thoroughly clean.
• Always clean the fluid inlet strainers on suction
tubes after flushing.
• Check with your material manufacturer for
chemical compatibility.