![background image](http://html.mh-extra.com/html/graco/linelazer-v-200mma/linelazer-v-200mma_operation-repair-parts_2250947014.webp)
Pressure Relief Procedure
14
3A9099A Operation, Repair, Parts
Pressure Relief Procedure
1. Perform
2. Set both Pump ON/OFF Valves to
OFF
.
3. Turn Pressure Control to lowest setting.
4. Close Fluid Valves A and B on the Gun Fluid
Manifold with the provided 5/16” nut driver.
5. Trigger the gun onto cardboard or into a waste
container to relieve pressure.
6. Engage all gun Piston Safety Locks. Turn both
Prime Valves to prime positions.
Clear Spray Tip Adapter Clog
7. If you suspect the Spray Tip Adapter (3) is clogged
or that pressure has not been fully relieved:
steps 1-6.
b. Remove the Spray Tip Adapter VERY SLOWLY.
c. Clear the obstruction in the Spray Tip Adapter
(3) and reinstall.
Clear Spray Tip Clogs
1. Release trigger. Engage Piston Safety Lock. Rotate
Spray Tip (22). Disengage Piston Safety Lock and
trigger gun to clear the clog.
2. Engage Piston Safety Lock, return Spray Tip (22) to
original position, disengage Piston Safety Lock and
continue spraying.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief
Procedure when you stop dispensing and before
cleaning, checking, or servicing the equipment.