LineLazer V LiveLook Display
44
3A9099A Operation, Repair, Parts
Marker Layout Mode
The Marker Layout Mode feature sprays a dot or a
series of dots to mark an area.
1. Use
to select Setup/Information. Press
to open Marker Layout Mode.
2. Use arrow keys to set up a marker pattern.
3. Marker layout example shows a typical lane layout
for reflective markers. Set space sizes up to eight
consecutive measurements. By leaving zeros in any
space, Marker Layout Mode will skip to the next
measurement in a continuous loop.
Some other uses of Marker Layout Mode are:
• Multiple spaced handicap stall layout
• Double line stalls
4. Set gun switch to skip line or solid line.
5. Press and release gun trigger control to start
marking dots. Press and release gun trigger control
again to stop.
An indicator before and after Marker Mode on the
screen alternately flash when gun trigger control is
pressed to signal mode is active.
Ref. Description
1
Select
a “Favorite”, press for less than one
second.
Save
a “Favorite”, press and hold for more than
three seconds.
2 Exits and returns to Information Menu.
3 Select value to change.
4 Adjust spacing value.
1
2
3
4
ti27860a
1
ti27918a
ti27912a
ti27862a
[1] 8.00´
[2] 4.00´
[3] 4.00´
[4] 16.00´
[5] 4.00´
[6] 4.00´
[7] 8.00´
[8] 0.00´
8.00 ft.
8.00 ft.
4.00 ft.
4.00 ft.
16.00 ft.
48.00 ft.
4.00 ft.
4.00 ft.
ti23812a
