Graco LineLazer V 200MMA, Operation - Repair - Parts

Page: 30 / 98

Cleanup
30 3A9099A Operation, Repair, Parts
11. Open B Fluid Valve (about three full turns).
12. Disengage Piston Safety Lock.
13. Hold gun against a grounded metal flushing pail.
Trigger guns and increase fluid pressure slowly until
pump runs smoothly.
14. Close B Fluid Valve, turn B Pump Valve OFF.
Repeat steps 4-12 for A side pump and gun.
15. Clean mixing chamber, tip, and tip guard in acetone
fluid.
16. Fill pump with Pump Armor and reassemble filter,
guard and tip.
17. Remove hose manifold, see Table 1: Nozzle Drill
Bit Sizes , page 47.
18. Disassemble Front End of Fusion MMA PC Gun ,
page 56, step 3.
19. Maintenance - LineLazer V 200MMA 1:1 , page
57, steps 6-8, place in acetone.
20. Lubricate o-rings, see Clean Muffler , page 54.
21. Maintenance - LineLazer V 200MMA 1:1 , page
57, step 5, place in acetone with tips and Spray Tip
Adapter.
22. Lubricate o-rings, see Clean Muffler , page 54.
23. Inspect the Check Valves , page 48.
24. Reassemble Front End of Fusion MMA PC Gun ,
page 56.
25. Reinstall hose manifold, see Table 1: Nozzle Drill
Bit Sizes , page 47.
26. Each time you spray and store, fill throat packing
nut with TSL to decrease packing wear.
TI2410A
Disengaged
FLUSH
TI3375A