Graco E-Flo 333587D, Operation, Page: 80 / 110

Integration
80 333587D
21 Reserved Word 1 uint16 - - 0-14 10-11 A
22
Prime Pressure Target (xxx.x bar)
(Tandem Unit sent to Inactive Pump)
(Ram Unit sent to Active Pump)
uint16 0 413.6 0-14 12-13 A
23
Prime Flow Target (xxxx cc/min)
(Tandem Unit sent to Inactive Pump)
(Ram Unit sent to Active Pump)
uint16 0 6000 0-14 14-15 A
24 Valve On Delay Target (xxxx ms) uint16 0 5000 0-14 16-17 A
25 Valve Off Delay Target (xxxx ms) uint16 0 5000 0-14 18-19 A
26 Motor On Delay Target (xxxx ms) uint16 0 5000 0-14 20-21 A
27 Motor Off Delay Target (xxxx ms) uint16 0 5000 0-14 22-23 A
Transition To Heated Map 18E224
28 System Heat Enabled Request Boolean 0 1 0
24
H
29 System Heat Disable Request Boolean 0 1 1 H
30 Heat PLC Lockout/Control Request Boolean 0 1 2 H
31 Heat On Request Boolean 0 1 3 H
32 Heat Off Request Boolean 0 1 4 H
33 Heat Setback Request Boolean 0 1 5 H
34 Acknowledge / Clear Heat Errors Request Boolean 0 1 6 H
35 Reserved Bit 1 Boolean - - 7 H
36 Reserved Bit 2 Boolean - - 0
25
H
37 Reserved Bit 3 Boolean - - 1 H
38 Reserved Bit 4 Boolean - - 2 H
39 Reserved Bit 5 Boolean - - 3 H
40 Reserved Bit 6 Boolean - - 4 H
41 Reserved Bit 7 Boolean - - 5 H
42 Reserved Bit 8 Boolean - - 6 H
43 Reserved Bit 9 Boolean - - 7 H
44 Heat Data Exchange Element Command uint16 0 32767 0-14 26-27 H
45 Heat Data Exchange Element Value Command uint32
See heat data
exchange for min
and max values
0-30 28-31 H
E-Flo iQ Maps 18E218 and 18E224
Automation OUTPUTS (signal from PLC to E-Flo iQ)
Instanc
e ID
Description
Data
Type
Min
Value
Max
Value
Bit Byte Heat