User Manual
33
Auto Detect server :Enable/disable automatically detect server function. Enable the
function when server forbid register time that is too short and
server do not initiatively maintain to send terminal nat packets .
Enable the function and set the sending the ip packets time is
less than nat maintain time.
Singal Encode: Enable/disable singal encryption
Rtp Encode : Enable /disable Voice encryption
Enable Private Regitster : Configure permit/deny private server register
Enable Session Timer : Enable/disable support RFC4028
6.7.7 Digital Map Configuration
6.7.7.1 Fixed Digital Map
End With “#”:
Checked : # for the end of dialing. User dial 200300# .phone send
200300 to server immediately . server receive 200300
Unchecked : # like digital number .Example: User dial #1966 ,
sever receive #1966
Fixed Length: When the length of the dialing match, the call will be sent.
Timeout:
Specify the timeout of the last dial digit. The call will be sent after
timeout
End with “#” , Fixed length , Time out these these option are not repulsion
6.7.7.2 User Define Flexible Digital Map Table
Digit map is a set of rules to determine when the user has finished dialing. Digital Map
is based on some rules to judge when user end their dialing and send the number to
the server. With digital map, users don’t have to press ‘#’ key or "call"key after dialing.
If the number dialed matches some item in the digital map table, or it doesn’t match
with any item, this number will be sent out immediately. It is not like using dial peer .
Using digital map won’t change the number dialed, the number sent is the same as
the number dialed.
x represents any one number between 0 and 9.
Tn
represents the last digit timeout. here [ n ] represents the time from 0~9 second, it
is necessary. Tn must be the last two digit in the entry. If Tn is not included in the
entry, we use T0 as default, it means system will sent the number immediately if
the number matches the entry.
(Dot) represents any number and no length limit.
[ ] number location value range . It can be a number range(such as [1-4]), or
number is separated by comma such as [1,3,5],, or use a list such as [234]
Example:
[1-8]xxx any 4 digits number between 1000 and 8999 sending out immediately
9xxxxxxx any 8 digits number starting with 9 sending out immediately
911 after finishing dialing 911 ,it will send out immediately
99T4 after finishing dial 911, it will send out in 4 second
