User Manual
16
Note:
IP Phone must config the correct WAN port IP address and Gateway IP address
before connecting to internet. Due to EP310-H Phone Default mode is router,
(bridge mode is disable) so the WAN port IP could not be set to the same segment
with LAN Port IP address when you modify WAN Port IP. Otherwise the, EP310-H
can not get into internet. But, if you had set wan port and LAN port to same ip
segment , you need to set EP310-H to factory default.
Process: power off ,and press # ,then power on ,input *#168 , and restart the
EP310-H
Default factory setting of WAN configuration is DHCP Client model
Default LAN Port IP=192.168.10.1 (Users could get them by pressing SYSINFO
Key)
5.3.2 Common Shortcut Keys
z
Keep pressing 1 key for three seconds, Wan port IP switch to static.
z
Keep pressing 2 key for three seconds, Wan port IP switch to DHCP.
Network
LAN
IP
IP
192.168.10.1
Input Value:
Input Value:
192.168.20.1
IP
192.168.20.1
6.Input
192.168.20.1
7.ENTER
Key
8.Press EXIT
twice
LAN
WAN
Static net
9.UP/DOWN
10.ENTER
11.ENTER
IP
IP
192.168.1.179
12.ENTER
MENU
1.INPUT “123”+
ENTER Key
Input Value:
Input Value:
192.168.1.70
IP
192.168.1.70
13.DEL
Key
15.ENTER
14.Input
192.168.1.70
4. ENTER
Key
3. ENTER
Key
2. ENTER
Key
5.DEL
Key
