User Manual
41
Example 1
T mean any length digit number.
Destination is 255.255.255.255 that mean calling out through SIP2 server.
Destination is 0.0.0.0 that mean calling out through SIP1server
Config page
Explanation Example
That means Any digits number starting with 9
pass through SIP2 server.
Here alais is
del
Delete Length is 1 that means the phone will
delete the first number before send number to
server
User dial 93333
SIP2 server receive 3333
It can be used for speed calling
The number user dialed will be replaced fully by
the number that is behind
all
)
Here alias is
all:
(not all)
User dial 2
Sip1 server receive 33334444
It can be used to add local area or prefix. before
sending out.
It saves user dialing number.
Here alias is
add:
(not add)
User dial 8309
SIP1 server receive07558309
user want to dial PSTN
（
010 6228
）
by SIP1
，
while actually the called number should be
86106228
，
then we can configure called number
as 010T, then rep
：
8610
，
and then set the
replacing length as 3. So that when user make a
call with 010 prefix, the number will be replaced
as 8610 plus the number and then sent out.
Replace the number that user dialed before
sending to SIP1 server.
Here alias is
rep:
(not rep)
User dial 010 6228
SIP1 server receive8610 6228
this is optional configuration item. It is to add
number behind the number user had dialed. when
no configuration has been made, shown as no
suffix
User dial 147
Sip1 server receive 147 0011
