User Manual
42
Example 2
The dial rule support exactitude matching priority.
When user dial 200 , It will pass through SIP2
When user dial 2009 , It will pass through SIP2
When user dial 20096, It will pass through SIP2
When user dial 201, It will pass through
SIP1
When user dial 20, It will pass through SIP1
6.9 Config Manage (Save and Clear configuration)
Notice: clear config in admin mode, all settings restores to factory default; clear config
in guest modem, all settings except sip, advance sip restore to factory default.
6.9.1 Save Config
Once change is made, Users should save the modified configuration to take effect,
otherwise the IP Phone will go back to the last saved setting after phone reboot.
The interface of “Save Config” as below, please follow the four steps below to config.
Enter “Config Manage” Menu
→
“Save Config” Submenu
→
Click “Save” Button
→
Return to “Current State” Web page
6.9.2 Clear Config
There are four method to clear config (set factory default), web
、
telnet
、
post mode
、
keypad. If the IP Phone doesn’t work properly after modifying config, users can clear
all modified config on “Clear Config” web page. The phone will clear all modified
config and restore the default factory configuration. (Default network type for WAN is
DHCP mode; default LAN
IP address is 192.168.10.1)
Process Please follow the below steps to clear config:
Enter “Config Manage” Menu
→
“Clear Config”
→
Click “Clear” Button
→
show “Submit
Success” info on screen
→
Click “Return” button
