User Manual
56
<config-netservice>#media-port –startport 10000 –number 200
<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask
255.255.255.0
8.6 Port Settings
path: <config-port>#
Function Command
set caller ID mode
Callerid xxx (xxx= bellcore | etsi | ntt | dtmf )
disable caller ID
no callerid
Disable call forward
no callforward
[disable]enable call transfer
[no]calltransfer
[disable]enable call waiting
[no]callwaiting
Set DTMF gain
Dtmf xxx
[disable]enable3-way conference
[no]threetalk
Show port settings
show
8.7 SIP Settings
path: <config-sip>#
Function Command
[disable]enable registration
[no] register
[disable]enable auto detect
server
[no] detect-server
Set sip domain
default-domain xxx
Set DTMF mode
dtmf-mode xxx (xxx=
relay|rfc-2833|sip-info)
Set auto detect interval time
interval-time xxx
[disable]enable auto swap server [no]swap-server
Set local SIP signal port
Signalport xxx
Set proxy server
server proxy -ip x.x.x.x _port xxx _user xxx _password xxx
Set register server info
server register -ip x.x.x.x _port xxx –user xxx _password
xxx
Set alter proxy info
alter-server proxy –ip x.x.x.x _port xxx _user xxx _password
xxx
Set alter server info
alter-server register –ip x.x.x.x _port xxx _user xxx
_password xxx
Show current sip info
show
Example:
#config sip server
<config-sip-server># server proxy ip 210.25.23.22 _port 5060 _user aaa _password
123456
8.8 User Management
path: <config-user>#
Function Command
Change user right.
access –user xxx –access xxx
Change user password
password –user xxx
Add new user
entry –user xxx –access 5 (or 12)
Delete user entry
no entry –user xxx
Show current sip info
show
Example:
#config user
<config-user>#entry –user abc –access 7
Example:<config-user>#access –user aaa –access 7
