User Manual
10
In the dial-up
mode
Delete a key entry, call log, voice mail
and etc.
DEL
In the keypad
configure mode
Modify the current configuration
parameter or delete input info
MUTE
In the IDLE mode
Mute an active call;
OUT
In the keypad
configure mode
Browse the outgoing call records
(maximum saving 100 records)
IN
In the keypad
configure mode
Browse the incoming call
records(maximum saving 100 records)
REC
In the IDLE mode
Enter voice mail submenu (maximum
saving 5 records)
PBOOK
In the IDLE mode
Access to phone book.(maximum saving
100 records)
Note:
1 Outgoing , Incoming ,Missed call support maximum 100 records, but power off will
lose the record.
2 Support 5 records: one for local message ,one for welcome message ,three for
incoming call leaving message
4.2 Dialing and Making Calls
4.2.1 Dialing General PSTN Phone or Extension.
There are three dialing modes:
1. Pick up handset or press SPEAKER button, and then enter the phone
numbers, IP phone will send out the numbers with the DTMF tones.
2. In the off hook mode or Hands-free mode, Press the REDIAL/SEND button
directly to redial the number last called. Once pressed, the last dialed number
will be displayed on the LCD with DTMF tones and an outgoing call is sent.
3. Make use of Speed dialing mode: enter PBOOK
→
SPEED DIAL
→
INPUT
INDEX submenu to input the index which correspond to the phone number you
want to dial, then the phone could automatically dial the number.
Process: PBOOKENTER—INPUT INDEX (1,2,3…) + #
4.2.2 IP to IP Calling (SIP support, IAX2 not support)
Making IP to IP calling is nearly same as dialing general PSTN Phone, there
are three
ways to set IP phone number and domain (more details please refer to 5.2.4)
1. “Peer to Peer” calling mode: direct make calls and no need to set phone
number thru proxy server (user could refer to Dial peer setting on web
configuration charter).The phone should be operated under following
condition (satisfy one option)
z
Requirement 1 both two phones are assigned the public IP address
individually
