User Manual
26
RFC2543. the default is to RFC3261
；
DTMF Mode
Set DTMF sending mode, support RFC2833,
DTMF_RELAY (in-band audio) and SIP info
User Agent
Set the user agent if have, default is Voip Phone 1.0 . I
If Server type is “net2phone: ,please fill in wan port mac
address.
Encrypt Key
Fill in the key for encryption according to the Server
type selected. Default is common.
Server Type
Special function for the SIP softswitch.example
encry ,private protocol authentication
Enable Register
Configure enable/disable register
After finished the aforesaid network and VoIP configurations on the phone and
network communication has been implemented
，
the user can make VoIP calls by the
calling register and proxy server.
Note:
Some ISP internet may inhibit the phone to register and cancel the register in
process, so user had better cancel apply or register soon and then submit
registration repeatedly. Server may stop response of dialogue machine, then
the phone receives no register/cancel login request and registration state will
show incorrectness!
Configuration Example
Firstly users should get the account info from VOIP Operator (Including Server IP
address, port, username, password etc.) and follow below procedure.
z
Config registered server and proxy server IP address and signaling port.
(Support DNS for registered server and proxy server)
z
Config the username and password for registered server and proxy server.
z
Config the phone number (Usually phone number is same with SIP account)
Remark: due to the above register username is “client”, so the phone number is
different from SIP account)
z
Config the domain realm (Usually it is same with registered server and proxy
server IP address, Let it be blank)
