User Manual
53
8.0 Telnet configuration
8.1 Config Procedure
z
Input command “cmd” on Run submenu under
PC START menu, and then key in “telnet phone-IP-address
enables users to config IP phone thru telnet.
z
Input username and password, both default
username and password of Administrator account are “admin”
z
Config IP Phone through command lines
Note:
1. We suggest users to config IP Phone thru web browser instead of
keypad or telnet.
2. After any change of configuration, please remember to make “write”
command to save changes and then input “reload” command to reboot
IP phone to take effect.
8.2 Telnet Basic Introduction
8.2.1 Basic Structure
User may use telnet command to access and manage gateway.
EP310-H adopts tree structure for telnet. Every node contains its sub-nodes or local
command. User can type “help” or “?” whenever to see sub-nodes and all local
command under current node.
Besides local command, there are some global commands can be used in each
node.
8.2.2 Basic Command
Logout: exit telnet mode.
Write: save current settings.
Type sub-nodes name in current node to switch to sub-node.
Type “!” or “exit” in current node to return to parent-node.
Type “help” or “?” can see all sub-nodes and all local command under current node,
every help item has comments such as <command> or <node> to distinguish
sub-nodes and local command. Type “help” or “?” in command can see all
parameters using in this command.
When typing node name or command, user no need to key the full name, use TAB
button will make it more efficient.
There are two types in command parameters: optional and required. “required”
parameter use “-” as prefix and “optional” use “_” as prefix. User may type “-” or “_”
then press TAB button for complementarily.
CHAPTER
