Glomex DANUBE NEO R500N, User And Installation Manual

Page: 76 / 146

74
www.glomex.it
DANUBE “NEO”
(R500N - R500N/DCSS)
ENGLISH
8.4 SATELLITE DATABASE
By clicking on the “Change Sat Setting” button or
going to the Menu section you can consult the
database of the satellites stored by Glomex (WITH
WEB CONNECTION ONLY) and their setting
parameters.
Once the satellite list stored by Glomex has been
displayed, you can:
1) set the satellite selected in one of the three
positions of the control unit (
Fig. 29 ).
2) Test the satellite in the position selected in the
control unit. The test settings are lost when the
control unit is turned off.
8.5 UPDATING THE FREQUENCIES AND
SATELLITE DATABASE
When Glomex releases the update of the satellite
frequencies a push notification is sent.
When the App is launched, this update is
highlighted by an icon on the upper bar on the top
right. This icon allows you to display the contents of
the update and proceed with updating if you want
(
Fig. 30 ).
Before updating, turn the control unit on and
connect the smartphone/tablet to the control unit as
indicated in paragraphs 8.1 and 8.2.
NOTA: The smartphone/tablet must be as close as
possible to the control unit for the entire updating
procedure.
If satellite frequencies cannot be updated via App,
use the SD Card, please refer to paragraph 10.
Fig. 29
Fig. 30