Glomex DANUBE NEO R500N, User And Installation Manual

Page: 96 / 146

94
www.glomex.it
DANUBE “NEO”
(R500N - R500N/DCSS)
ENGLISH
For further information, please address to the
GLOMEX Service Centre (see section “Technical
Support”).
12. Confused, incomplete and
obstructed images
- condensate or rain on the
radome, which can disturb the
signal with still vehicle
- remove the condensate
deposits from the radome with
a fresh water jet (not under
pressure) or with a rag
- bad weather conditions - periodically wash using a liquid
detergent suitable for dishes
(no alcohol-based detergent)
on the radome surface and let
dry up
13. The decoder blocks - alternating current fluctuations - refer to the user manual of the
receiver for support