Glomex DANUBE NEO R500N, User And Installation Manual

Page: 60 / 146

58
www.glomex.it
DANUBE “NEO”
(R500N - R500N/DCSS)
ENGLISH
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
1. Electric drill.
2. Drill tips: 3.5 mm (for fastening the control unit
to solid wood or metal), 6 mm (for expansion
plugs in lightweight or hollow furniture or
chipboard, for fastening the control unit), 8 mm
(for fastening the radome).
3. ø 25 mm hollow mill (for cutting the hole for
fairlead assembly).
4. Phillips screwdriver (with adequate dimensions
for control unit opening).
5. 11 mm wrench (for the installation of the coaxial
cable connectors).
6. 2 mm Allen wrench (for M4 dowels).
7. Reciprocating saw (to drill a hole in case of wall
built-in installation of the control unit; use the
template provided on page 66).
8. Sealant like SIKAFLEX®252.
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
Fig. 4