Glomex DANUBE NEO R500N, User And Installation Manual, Page: 74 / 146

72
www.glomex.it
DANUBE “NEO”
(R500N - R500N/DCSS)
ENGLISH
8. USING GLOMEX SATELLITE APP
8.1 FIRST CONFIGURATION - STARTING
UP THE CONTROL UNIT
Download the Glomex Satellite App from the Apple
Store.
Or download the Glomex Satellite App from Google
Play.
With the control unit off, position the selector on
SAT 1 (knob A in
Fig. 24 ).
Turn the control unit on and switch the selector to
position SAT 3 within two seconds. The green LED
starts blinking. If the LED does not start blinking,
repeat the procedure from the start.
NOTA: This operation must be repeated every time
the mobile device associated with the control unit is
changed.
S
WARNING
The control unit can be connected to one mobile
device only at a time.
8.2 CONNECTION BETWEEN APP AND
CONTROL UNIT
Open the App. Put the smartphone/tablet as close
to the control unit as possible. Connect the App to
the control unit by selecting the satellite icon at the
top right (
Fig. 25 ).
A window with the list of
Bluetooth®
signals
available is shown, together with the relevant
percentage of the signal power.
The signal generated by the GLOMEX antenna is
called
GLOMEX_BT , and it must be selected to
connect to the control unit ( Fig. 26 ).
Fig. 25
Fig. 26