PART THREE - OPERATION
SECTION 4 - ANALYZER CONFIGURATION
Model C53 Conductivity Analyzer (universal-mount 1/2 DIN)
Rev. 5-1000
48
4.3 Configuring Calculated
Sensor A and B
Measurement
☞
SELECT MEASURE
(none, % reject, % pass,
ratio A/B, ratio B/A,
diff. A-B or diff. B-A)
3.
After the
6(7 7 )$&725
6(7 0$18$/
(;,7
screen re-appears, press
ESC
key
twice to return to the
6(7 287387
6(7 5(/$< $
6(7 5(/$< %
6(7 5(/$< &
6(7 5(/$< '
6(7 3$66&2'(
6(7 & 25 )
/$1*8$*(
6(1625 $
6(1625 %
&$/&8/$7,21
(;,7
screen.
The analyzer can display a calculated measurement derived
from the measured Sensor A and Sensor B values. Any
analog output and/or relay can be assigned to represent the
calculated measurement.
NOTE:
For a calculated measurement, both sensors must be:
•
Connected and used.
•
Configured for the same measurement (conduc-
tivity, resistivity or TDS)
•
Set for the same measurement units. However,
each sensor can have a different cell constant pro-
viding an inherently different measuring range.
1.
With the
6(7 287387
6(7 5(/$< $
6(7 5(/$< %
6(7 5(/$< &
6(7 5(/$< '
6(7 3$66&2'(
6(7 & 25 )
/$1*8$*(
6(1625 $
6(1625 %
&$/&8/$7,21
(;,7
top-level menu screen dis-
played, use
Ø
Ø
key
to select the “CALCULATION” line.
2.
Press
ENTER key
to display
',63/$< )250$7
(;,7
.
3.
With the “SELECT MEASURE” line selected, press
ENTER key
to display
. Use
Ø
Ø
and
×
×
keys
to view the choices (NONE, % REJECT, % PASS,
RATIO A/B, RATIO B/A, DIFF A-B or DIFF B-A). With
the desired choice displayed, press
ENTER key
to en-
ter this selection.
