PART THREE - OPERATION
SECTION 2 - MENU STRUCTURE
Model C53 Conductivity Analyzer (universal-mount 1/2 DIN)
Rev. 5-1000
36
☞
2.3 Displaying
Submenu Screens
2.4 Adjusting
Edit/Selection
Screen Values
2.5 Entering (Storing)
Edit/Selection Screen
Values/Choices
☞
screen. A
È
symbol at the bottom right of the list indi-
cates that you can display hidden items by pressing the
Ø
Ø
key
. As you display these items a
↕
symbol appears,
indicating that items now hidden above and below the
list can be displayed by respectively pressing the
×
×
or
Ø
Ø
key
. When a
Ç
symbol appears, it indicates you have
reached the end of the menu list. You can move back up
the list using the
×
×
key
.
NOTE:
A symbol pointing at a listed menu item indicates
the item is not relevant to, nor required for, the pre-
viously entered setup choices, and is not available.
1.
After displaying the top-level menu screen, use the
Ø
Ø
and
×
×
keys
to select the line corresponding to the
desired lower-level submenu screen.
2.
Press the
ENTER key
to display the submenu screen.
When a submenu or sub-submenu screen contains a first
line ending with a “?,” it is an edit/selection screen. Pressing
the
Ø
Ø
or
×
×
key
changes the value/choice enclosed by pa-
renthesis (second line on screen).
Example:
With this submenu edit screen displayed:
pressing the
Ø
Ø
key
displays this related choice:
Use the
arrow keys
to edit/change the value/choice en-
closed by parenthesis (examples shown above and below).
A choice can be changed by simply using the
×
×
and
Ø
Ø
keys
.
Numerical values can be “coarse” adjusted using
Õ
Õ
and
Ö
Ö
keys
, and “fine” adjusted using
×
×
and
Ø
Ø
keys
. The longer a
key is pressed, the faster the number changes.
With the desired value/choice displayed, press the
ENTER
key
to enter (store) it into the non-volatile analyzer memory.
The previous screen will then re-appear.
NOTE:
You can always press the
ESC key
to abort saving
a new setting. The original setting will be retained.
