PART THREE - OPERATION
SECTION 3 - TRANSMITTER CONFIGURATION
Rev. 0-201
PRO-series Model C3 Conductivity Transmitter
39
ENTER NOTE (top line
of MEASURE screen)
2.
Press
ENTER key
to display
.
3.
Press
ENTER key
again to display a screen like
. Use
arrow keys
to adjust the
displayed value to the desired % per
°
C slope, and
press
ENTER key
to enter the value.
4.
After the
screen re-appears, press
Ø
Ø
key
once to display
.
5.
Press
ENTER key
to display a screen like
. Use
arrow keys
to adjust the
displayed value to the desired reference temperature,
and press
ENTER key
to enter the value.
6.
After the
screen re-appears, press
ESC key
once to return to the
screen.
The top line of the MEASURE screen readouts that sepa-
rately show the measurement, temperature, and analog
output values are factory set to read “COND.” This notation
can be changed, for example, to “BASIN 1” to tailor the
transmitter MEASURE screen to the application. The top
line would then be “MEASURE BASIN 1.” The notation is
limited to eight characters which can be a combination of
capital letters A through Z, numbers 0 through 9, spaces,
# symbols, hyphens, and periods.
1.
With the
screen displayed, press
Ø
Ø
key
once to display
.
2.
Press
ENTER key
to display
.
Create the desired notation on the second line:
