Rev. 0-201
PRO-series Model C3 Conductivity Transmitter
3
IMPORTANT SAFETY INFORMATION
This transmitter is compliant with safety standards as outlined in:
FMRC Class Numbers 3600, 3611, and 3810 (U.S.A.)
CSA C22.2 No. 142 and C22.2 No. 213 (Canada)
EN 61010-1 (European Community)
Please read and observe the following:
•
The transmitter (not intrinsically safe) must always be located in a safe (non-hazardous) area.
•
Since the transmitter is powered by only low DC voltage, it is completely safe to handle.
•
Wiring or repairs should only be performed by qualified personnel, and only when transmitter is unpowered.
•
Whenever it appears that transmitter safety is questionable, disable the transmitter to ensure against
any unintended operation. For example, an unsafe condition is likely when:
1) The transmitter appears visibly damaged.
2) The transmitter fails to operate properly or provide the intended measurements.
3) The transmitter has been stored for long periods at temperatures above 158
°
F (70
°
C).
•
Installed this transmitter in accordance with relevant local codes and instructions contained in this
operating manual. Also, note and comply with the transmitter’s technical specifications and ratings.
HELPFUL IDENTIFIERS
In addition to information on installation and operation, this instruction manual may contain
WARNINGS pertaining to user safety, CAUTIONS regarding possible instrument malfunction,
and NOTES on important, useful operating guidelines.
WARNING:
A WARNING LOOKS LIKE THIS. IT WARNS YOU OF THE
POTENTIAL FOR PERSONAL INJURY.
CAUTION:
A CAUTION LOOKS LIKE THIS. IT ALERTS YOU TO POSSIBLE
INSTRUMENT MALFUNCTION OR DAMAGE.
☞
NOTE:
A note looks like this. It alerts you to important operating
information.
