PART TWO - INSTALLATION
SECTION 2 - MECHANICAL REQUIREMENTS
PRO-series Model C3 Conductivity Transmitter
Rev. 0-201
18
2.2 Wall and Pipe
Mounting
Figure 2-1 illustrates how to wall or pipe mount the trans-
mitter using the supplied GLI hardware kit. Determine the
mounting method, and attach the hardware as shown.
1.
Fasten the wall/pipe adapter to the wall or pipe.
2.
Using a blunt tool, open both cable entry knockout
holes in the back cover.
3.
Insert-and-twist the back cover onto the installed
wall/pipe adapter, and tighten its screw to lock back
cover onto adapter.
4.
Attach transmitter to back cover using its four captive screws.
FIGURE 2-1 Wall and Pipe Mounting Details
