PART THREE - OPERATION
SECTION 1 - USER INTERFACE
Rev. 0-201
PRO-series Model C3 Conductivity Transmitter
29
2.
ENTER key:
Pressing this key does two things; it dis-
plays submenu and edit/selection screens, and it enters
(saves) configuration values/selections.
3.
ESC key:
Pressing this key always takes the display up
one level in the menu tree. (Example: With any “MAIN
MENU” screen displayed, pressing the
ESC key
once
takes the display up one level to the MEASURE
screen.) This key can also “abort” the procedure to
change a value or selection.
4.
Õ
Õ
and
Ö
Ö
keys:
Depending on the type of displayed
screen, these keys do the following:
•
MEASURE Screen: Changes readout (in continuous
loop sequence) to show different measurements.
•
Menu Screens: These keys are non-functional.
•
Edit/Selection Screens: Moves cursor left or right to
select digit for adjustment with
×
×
and
Ø
Ø
keys
.
5.
×
×
and
Ø
Ø
keys:
Depending on the type of displayed
screen, these keys do the following:
•
MEASURE Screen: These keys are non-functional.
•
Menu Screens: Moves up or down respectively
between other same-level menu screens.
•
Edit/Selection Screens: Adjusts selected digit value
up or down, or moves up or down between choices.
FIGURE 3-1 Transmitter Keypad
