Gladius G1220 User Manual Download Page 90

Page: 90 / 113

- 74 -

Utilities

Use a stylus to accurately tap-and-hold the said red square until a message

Lift off to proceed

prompts onscreen.

Repeat the same action for the other four red squares which are to

consecutively show onscreen.

Note: If no action is taken within 12 seconds, the calibration will auto-abort. The

utility may start over the countdown for an ineffective tap-and-hold.

•

Edge Compensation tabbed page

Access

Edge Compensation

tabbed page to improve the accuracy of mouse

pointer at the edges of the touch screen. Note

Edge Compensation

is supported by

Advanced Calibrations

only.

To access the

Edge Compensation

tabbed page:

1. Open

Device 0

window as described in

4.2.1.2.1. Device # Window

on page

The

Device 0

window opens.

2. Tap the

Edge Compensation

tab.

The

Edge Compensation

tabbed page opens.

Edge Compensation

tabbed page opens.

Summary of Contents for G1220


















































































































Search results

Summary of Contents for G1220

Reviews:

Related manuals for G1220

Brands by name

Popular brands

Gladius G1220, User Manual

Search results

Summary of Contents for G1220

Reviews:

Related manuals for G1220

Brands by name

Popular brands